2-finger Grippex home page

The 2-finger type is intended for handling square, rectangular and irregular profiles such cast profiles.

Grippex 2-fingers pick-up unit exists in 3 different sizes. Grippex IITL (twin large), Grippex IITS (twin small) and Grippex Mini. The over-all dimensions depend on the fingers used. For maximum gripping force and minimum interference, use gripping fingers matching your lathe's capacity.
Grippex II Twin Large

L
 Straight shank
 Directly fitted on the back plate
 71 mm
 VDI30
 Back plate VDI (L+11.80 mm)
 82.80 mm
 VDI40
 Back plate VDI (L+12.80 mm)
 83.80 mm
 GRIPPING RANGE
° A
° B
° C
 Fingers 2-60 mm, Inserts
 61 mm
 83 mm
 110 mm
 Fingers 3-80 mm, Inserts
 80 mm
 103 mm
 120 mm
 Fingers 7-105 mm, Inserts
 105 mm
 128 mm
 134 mm
 Fingers 3-80 mm, Jaws
 68 mm
 108 mm
 112 mm
 Fingers 7-105 mm, Jaws
 90 mm
 132 mm
 137 mm




Available shanks:
 Straight °25, °32, °40 mm
 VDI30, VDI40
 Straight °1",°1-1/4", °1-1/2"
Available gripping fingers:
 2-60 mm with Robot Inserts
 3-80 mm with Robot Inserts
 7-105 mm with Robot Inserts
 3-80 mm with Robot Jaws
 7-105 mm with Robot Jaws


Grippex II Twin Small

L
 Straight shank
 Directly fitted on the back plate
 64 mm
 VDI20, VDI25
 Directly fitted on the back plate
 64 mm
 VDI30
 Back plate VDI (L+11.80 mm)
 75.80 mm



Available shanks:
 Straight °20, °25, °32 mm
 VDI20, VDI25, VDI30
 Straight °1",°1-1/4", °1-1/2"
Available gripping fingers:
 2-52 mm, Robot Inserts


Grippex Mini

L
 Straight shank
 Directly fitted on the back plate
 49.50 mm
 VDI16
 Directly fitted on the back plate
 49.50 mm
 VDI20
 Back plate VDI (L+11.80 mm)
 61.30 mm




Available shanks:
 Straight °16, °20, °25 mm
 VDI16, VDI20
 Straight °1"
Available gripping fingers:
 0-39 mm, Robot Jaws

Maskinportalen

for machine tool
industry.

- News
- Agent register
- Suppliers
- Links etc.


maskinportalen.se

Copyright ę 2006 MPC Automation Systems AB